View Enquiry List

Divine International's                   
High Quality at Lowest Prices Guaranteed .
Indian Scientific Goods




Add me to Skype 



Aggregate Testing Instruments

AGGT 001
Thickness Gauge
As Per IS:2386 (Part-1)
Used for determining the flakiness index of aggregates. It consists of a frame with a sliding panel. The panel has slots of different standard lengths and widths accurately cut.
AGGT 002
Length Gauge
As Per IS: 2386 (Part-1)
For determination of the elongation index of aggragates. It consists of a hard wood base with vertically mounted metal studs.
AGGT 003
Cylindrical Measures
As per IS:2386 (Part-III)
For determining bulk density or unit weight of aggregates. Calibrated cylindrical measures are made of sheet iron with handles. Consists of 3 measures; one each of 3 litres, 15 litres and 30 litres capacity. Complete with one tamping rod, round, 16 mm dia and 600 mm long, one end rounded.
AGGT 004
Metal Measures
As Per IS:1199-1959
For determining the unit weight of aggregate. Made from sheet iron, complete with handle, capacity 10 litres or 20 litres
AGGT 005
Density Basket
As per IS:2386 (Part-III)
For density tests on aggregates. Made of brass with stainless steel wire mesh of 6.3mm size, rugged construction, approximately 20cm dia X 20cm height. Complete with handle.
AGGT 006
Riffle Sample Divider
As per IS:1607-1960
Used for sampling aggregates, ores, refractory materials, pigments, powdered coal, soap, cement, etc. It consists of a sheet metal box mounted on legs and fitted with a series of chutes of equal width which discharge the material alternatively in opposite directions into separate pans. The chutes of the riffle are steep enough to allow rapid flowing of the material. It has 14 chutes of 13mm width and is complete with receivers.
Also available with 16 chutes of 25mm width, complete with two receivers.
AGGT 007
Aggregate Crushing Value Apparatus
As per IS:9376, 2386 (Part-IV)
For measuring the resistance of aggregate to crushing. It consists of M.S. cylinderical container 150mm 0.5mm dia x 130mm to 140mm height with base plate 200 to 230mm/sqr x 6mm thick. Comes with a plinger of 148mm 0.5mm dia x 100 to 115 mm height. Supplied complete with tamping rod, 16mm dia x 600mm long, one end rounded. Also comes with one metal measure 115 0.5mm dia x 180 0.5mm height.
AGGT 008
Aggregate Impact Tester
As per IS:2386 (Part-IV) 9377
Used for determining aggregate impact value. It consists of a circular base with two vertical guides. The hammer of weight 13.75 0.25 Kg can be raised to fall freely down the vertical guides. The height of fall can be adjusted through 380 5mm. The hammer is provided with a locking arrangement. The hammer falls freely to the base and is removable for emptying. Supplied complete with metal measures 75mm dia x 50mm height (for specimen preparation) and tamping rod 230mm long x 10mm dia.
Also available with automatic blow counter.
AGGT 009
Specific Gravity And Water Absorption Of Aggregates
This set is used for specific gravity, apparent specific gravity and water absorption of aggregates. The outfit comprises of - 1 No. Semi-self indicating balance, capacity 5 kg, accuracy 0.5 gm., provision is made in this balance to suspend density basket under material pan. Balance is supplied with necessary set of weights. This balance is mounted on an angle iron frame stand. 1 No. Density Basket, 1 No. Air tight container of capacity similar to that of density basket, 1 No. Water tight container to suspend density basket, 1 No. G.I. Tray of area not less than 650 cm.sq., 2 Nos. Absorbent clothes 75 cm x 45 cm
AGGT 010
Deval Attrition Tester
For determination of resistance of aggregates to wear by abrasion. It consists of two hollow cylinders closed at one end and provided with tight fitting covers at the either end. These cylinders are mounted on a shaft at an angle of 30 degrees with the axis of rotation of the shaft. The shaft rotates at 30-33 r.p.m. through a reduction gear operated by a motor and is provided with a revolution counter. Complete with abrassive charges consisting of 12 Nos. Hardened steel ball of 48mm dia. Suitable for operation on 440 volts, 3 phases, 50 cycles.

 First : : Previous : : Next : : Last

Scientific Goods


Medical Instruments


Industrial Instruments


Untitled Document



We Reserve The Right To Change The Design & Specifications Of The Instruments Without Notice.
Copyright © 2007 Divine International. All rights reserved.